13 January 2012
TanDEM-X has completely captured the Earth - strip by strip
A year after the initial operational phase, TanDEM-X has mapped all land surfaces on earth except Antarctica completely. Elevation models have been generated with the data. According to the color scale, green tinted areas already comply with a the requirement of a two-metre accuracy. Yellow-coloured areas must be recorded a second time, reddish surfaces also require recording from a different angle. Gray-shaded strips have been recorded, but have yet to be processed.
The first TanDEM-X mosaic of Iceland
As part of the TanDEM-X mission, the strips of terrain recorded by the two satellites are processed into elevation models measuring 50 by 30 kilometres, which are then combined into a global digital elevation model. This first mosaic shows Iceland, which, because of its location north of 60 degrees latitude, could not be covered by the Shuttle Radar Topography Mission (SRTM) in 2000 and was surveyed from space for the first time by TanDEM-X.
SRTM image of opencast lignite mining in Jülich…
Comparing the Shuttle Radar Topography Mission (SRTM) elevation model from 2000 and the data acquired by TanDEM-X over the opencast lignite mine at Hambach, near the German town of Jülich, the improved accuracy is impressively demonstrated. In addition, the changes over the past 10 years can be seen – the mining activity has progressed considerably.
… and a TanDEM-X image of the Jülich mine for comparison
After a year in service, the German Earth observation satellite TanDEM-X, together with its twin satellite, TerraSAR-X, have completely mapped the entire land surface of Earth for the first time. The data is being used to create the world's first single-source, high-precision, 3D digital elevation model of Earth. The German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt; DLR) controls both radar satellites, generates the elevation model and is responsible for the scientific use of TanDEM-X data.
The TanDEM-X mission – running like clockwork
It is reminiscent of ballet on ice; throughout the last year, Germany's radar satellites, TanDEM-X and TerraSAR-X, have been moving through space in close formation, at times just a few hundred metres apart. Strip by strip, they have recorded Earth from different angles and transmitted high-resolution radar data from their orbit at an altitude of 514 kilometres down to the three ground stations – Kiruna (Sweden), Inuvik (Canada) and O'Higgins (Antarctica). "The mission is running better than expected and there have been no unscheduled interruptions in the programmed formation flight of the two satellites. All safety mechanisms are functioning robustly and in a stable manner," enthuses Manfred Zink, project manager for the TanDEM-X ground segment at DLR. Over the course of 2011, the distance between the satellites was progressively reduced down to the minimum permitted value of 150 metres.
'Radar eyes' working with millimetric accuracy
This satellite mission is the first of its kind; it remains unique and is highly complex, even for experienced engineers. "Following the launch of TanDEM-X on 21 June 2010, there was a six-month test phase, during which we subjected the satellite and its behaviour in near-Earth orbit to intense scrutiny and carried out our calibration work," Zink recalls. During this time, TanDEM-X commenced formation flying with its identical partner satellite, TerraSAR-X, which was launched in 2007. On 14 December 2010, the operational part of its mission began, collecting data for the high-precision elevation model.
The radar system views the ground from two different points in space, achieving 'depth perception' in a manner similar to binocular vision in humans. "The generation of accurate elevation data calls for precise coordination of data from and between both satellites," explains Gerhard Krieger, systems engineer for the TanDEM-X mission. Differences, for example in the cable lengths on the two radar instruments, as well as the distance between the two satellites, need to be calibrated very precisely. "This is a truly enormous challenge when you consider that a millimetre of variation can cause up to one metre of elevation error," says Krieger.
The strips of terrain recorded by the satellites are processed into elevation models measuring 50 by 30 kilometres. Due to the ultra-precise calibration, when this 'basic data' is compiled at the end of the process to generate a global 3D map, it is already of very high quality. By mid-2013, TanDEM-X and TerraSAR-X will have imaged the complete land surface area of Earth – roughly 150 million square kilometres – several times. The intention is to create an exceptionally accurate, global and homogeneous 3D elevation model that promises to be of equal interest for commercial and scientific purposes.
Data quality depends on ground reflectance
Initially, at least two complete coverage cycles of Earth's land surface were planned. Some parts, one example being the vast majority of Australia's landmass, were recorded by the satellite duo with sufficient quality during the first overflight. "The level of precision depends on how well the ground reflects the radar pulses transmitted – and subsequently received – by the satellites," states Manfred Zink. For example, the Sahara is more difficult to image because the signal literally 'sinks into the sand' and is lost. For regions of dense vegetation, such as rain forests, additional imagery and careful adjustment of the distance between the satellites are necessary. "We are going to be left with a few blank areas on the map, but we do of course seek to minimise these gaps," states Zink as he thinks about the coming months.
Better understanding Earth as a system
"We want to gain a better understanding of Earth as a system and to employ the data for climate and traffic research, for example," says Irena Hajnsek, scientific coordinator for the TanDEM-X mission. In 2011, she gave the 'green light' for 166 of the research applications submitted to DLR. "Most of these originated in the USA and Germany. The TanDEM-X capabilities are to be used to address questions of land usage and vegetation, hydrology, geology and glaciology," explains Hajnsek. The two Earth observation satellites can also generate information about the height of the snowline or the change in ice masses of the two polar regions, as well as provide geological maps of regions subject to volcanic and/or earthquake activity. The speed of ships or road vehicles can be measured, as can changes in the natural world. The work performed by these two radar satellites is also valuable for agriculture. "Based on the height and structure of a plant – such as rapeseed, for example – it is possible to draw conclusions about its quality and biomass," states Hajnsek.
About the mission
TanDEM-X is operated by the German Aerospace Center (DLR) with funds from the German Ministry of Economics and Technology in the form of a public-private partnership with Astrium GmbH. DLR is responsible for the scientific use of TanDEM-X data, planning and implementiation of the mission as well as controlling the two satellites and generating the digital elevation model. Astrium built the satellite and shares the costs for the development and use. Commercial marketing of TanDEM-X data is managed by Astrium Services’ GEO-Information Division (formerly Infoterra GmbH), a subsidiary of Astrium.
Last modified:16/01/2012 09:32:13
15/01/2012 13:57 -
from jose francis
Now we will know the precise shape of the earth. Tidal effects of themoon on terra firma , solid earth could be measured. Rememberthe hardships of the nineteenth century scientist who measured thegreat circle in Europe. This is a leap forward. Formation flying ofsatellites is another impressive technological leap. Mounted withtelescopes we could have a 3D image of the deep sky too, with abaseline of 1000metres ( the distance between two telescopes).
15/06/2012 01:55 -
I don't know if this project is going to be publicly available at a low 'resolution', but if it would, a lot of people would be very interested in this kind of actually accurat 3D model.I'm envisioning a 3D printed model scale 1 to 50 000, which makes the model small enough (± 25mm diameter) to be printed by current 3D printers. Could anyone inform me about any possible publicly distributed (low resolution) models? (see e-mail at name/from)
18/06/2012 12:10 -
from Manfred Zink
It is planned to make low-resolution version (90 x 90 m posting) publicly available. Expected time frame: end 2014For further details please contact:firstname.lastname@example.org
11/06/2013 06:59 -
from Ben Clark
What would be the point of a public 90m spacing, there are already 30m datasets available for the globe of equal quality? I was hoping to see the full resolution publicly released, at 90m spacing this is simply not useful as an improved dataset.
11/06/2013 14:31 -
from Dr.-Ing. Manfred Zink, German Aerospace Center (DLR)
@Ben Clark:The TanDEM-X mission has been implemented as a public-private-partnership between DLR and EADS Astrium. The full resolution DEM is a key asset for the commercial exploitation by Astrium Services. Full resolution DEMsfor specific test sites (limited coverage) are also available to scientists (email@example.com).The publicly available 90m DEM will be more accurate than the SRTM version and will have global coverage includingthe areas beyond 60deg North/South latitude.
03/12/2014 11:58 -
from arif (al) oguz altunel
The year is closing fast to its end, are you gonna be able to keep the previous word and publicly release the global 90 m DEM coverage, thank you.
05/01/2015 16:09 -
from Manfred Zink
@arif (al) oguz altunel:Yes, the release is still planned.