DLR Logo
DLR Portal Home|Imprint|Sitemap|Contact   Deutsch
  You are here: Home:

TanDEM-X - the Earth in three dimensions



 Flying in formation, TanDEM-X and TerraSAR-X
zum Bild Flying in formation, TanDEM-X and TerraSAR-X

The main objective of the TanDEM-X mission is to generate an accurate three-dimensional image of Earth that is homogeneous in quality and unprecedented in accuracy. At present, the elevation models that are available for large parts of Earth are of low resolution, inconsistent or incomplete. In addition, they are commonly based on different data sources and survey methods. TanDEM-X, TerraSAR-X add-on for Digital Elevation Measurement, is designed to close these gaps and deliver a homogenous elevation model that should prove indispensable for many scientific and commercial applications. Orbiting Earth at an altitude of around 500 kilometres, the two nearly-identical radar satellites have begun mapping its surface.

The first of the two, TerraSAR-X, has been operating since 2007. Three years years on, it has been joined by its twin satellite, TanDEM-X. Flying in close formation only a few hundred metres apart, the two satellites are imaging the terrain below them simultaneously, from different angles. These images are processed into accurate elevation maps with a 12-metre resolution and a vertical accuracy better than 2 metres. The amount of data generated by the satellites will grow to 1.5 petabytes within three years, corresponding to a storage capacity of almost 200,000 DVDs. Like the TerraSAR-X mission, TanDEM-X is a project developed under a public-private partnership between the German Aerospace Center, DLR, and Astrium GmbH based in Friedrichshafen, Germany.

The TanDEM-X mission

The TanDEM-X mission will survey all 150 million square kilometres of Earth's land surface several times over during its three-year mission. Apart from its high measuring-point density (a 12-metre grid) and high vertical accuracy (better than two metres), the elevation model generated by TanDEM-X will have another unrivalled advantage – being entirely homogenous, it will serve as a basis for maps that are globally consistent. Conventional maps are often fragmented along national borders, or difficult to reconcile as they are based on different survey methods or because of time lags between survey campaigns.

Together TanDEM-X and TerraSAR-X are form the first configurable synthetic aperture radar interferometer in space. Besides this primary goal, the mission has several secondary objectives based on new and innovative methods such as along-track interferometry, polarimetric synthetic aperture radar interferometry, digital beamforming and bistatic radar. The TanDEM-X satellite follows the TerraSAR-X design with minor modifications such as an additional cold gas propulsion system (powered by high-pressure nitrogen gas) to enable fine-tuning of its relative position during formation flying and an additional S-band receiver to receive status and position information sent by TerraSAR-X. The TanDEM-X satellite has been designed for a nominal lifetime of five years and has a planned overlap with TerraSAR-X of three years. TerraSAR-X holds consumables and resources for up to seven years of operation however, potentially allowing for a prolongation of the overlap and the duration of the TanDEM-X mission

A German key project

Following in the footsteps of European radar satellites ERS-1, ERS-2, Envisat and TerraSAR-X, as well as the joint US-German-Italian Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew on the Space Shuttle and the US Shuttle Radar Topography Mission,  TanDEM-X seeks to  support scientific and commercial applications of radar-based Earth observation. Demonstrating Germany's expertise in satellite-based radar technology, the mission is the result of a long-term focus in Germany's national space programme. The German Federal Ministry for Economics and Technology has funded the project (code 50 EP 0603).

Public-private partnership

The TanDEM-X mission is financed and implemented as a public-private partnership between the German Aerospace Center, DLR, and Astrium. Funded by the Federal Ministry for Economics and Technology under the ID code 50 EP 0603, TanDEM-X is a PPP project conducted jointly by DLR and Astrium GmbH. DLR is responsible for providing TanDEM-X data to the scientific community, mission planning and implementation, radar operation and calibration, control of the two satellites, and generation of the digital elevation model. To this end, DLR has developed the necessary ground-based facilities. The project's scientific coordination has been entrusted to the DLR Microwaves and Radar Institute in Oberpfaffenhofen. Astrium has built the satellite and shares the cost of its development and use. Infoterra GmbH, a subsidiary of Astrium, is responsible for commercial marketing of the data from both missions, TerraSAR-X and TanDEM-X.

TanDEM-X quick facts
Launch: Summer 2010
Launch site: Baikonur (Kazakhstan)
Launcher: Dnepr-1
Orbit altitude: 514 kilometres
Orbit inclination: 97.4 degrees
Satellite mass: 1330 kilograms
Satellite dimensions:

Height: 5 metres
Diameter: 2.4 metres

Power consumption: 730 watts (average)
Mission operation: German Space Operations Center,  Oberpfaffenhofen
Satellite command: Weilheim ground station
Data reception: Ground stations:
- Inuvik, Canada
- O'Higgins, Antarctic
- Kiruna, Sweden
Satallite lifetime: 5.5 years (6.5 years for consumables)
Radar centre frequency: 9.65 gigahertz (X-band)


 


Last update: 17/06/2010 14:59:40
Copyright © 2014 German Aerospace Center (DLR). All rights reserved.