4. July 2017
ROBEX mission in the simulated Moon environment of Mount Etna comes to an end

Suc­cess­ful in­ter­ac­tion be­tween rover, lan­der and sen­sor units

Lan­der in view
Image 1/3, Credit: DLR (CC-BY 3.0).

Lander in view

To find its way to the lan­der, Rover LRU-2 (Lightweight Rover Unit) cre­at­ed a map of the en­vi­ron­ment dur­ing the ROBEX project with the help of its cam­era eyes.
Work­ing au­tonomous­ly: Rover LRU-2 us­ing the sen­sor unit
Image 2/3, Credit: DLR (CC-BY 3.0).

Working autonomously: Rover LRU-2 using the sensor unit

One of the ob­jec­tives of DLR's demon­stra­tion mis­sion on Mount Et­na is that Rover LRU-2 au­tonomous­ly takes the sen­sor unit, that is at­tached to the RODIN lan­der.
On its way to the mea­sure­ment site
Image 3/3, Credit: DLR (CC-BY 3.0).

On its way to the measurement site

Rover LRU-2 nav­i­gates au­tonomous­ly to the spec­i­fied lo­ca­tion where the sen­sor units for seis­mic mea­sure­ments are to be stored. Dur­ing project ROBEX, lan­der, rover and sen­sor units com­mu­ni­cate with each oth­er and car­ry out the ex­plo­ration of un­fa­mil­iar ce­les­tial bod­ies au­tonomous.

  • Demonstration mission on Mount Etna: the volcano becomes a lunar landscape for the Helmholtz Alliance ROBEX (Robotic Exploration under Extreme Conditions).
  • Five DLR institutes develop and test technologies for autonomous exploration of inaccessible regions.
  • Focus: aerospace; robotics; planetary research

It looks simple: the rover heads straight for the landing craft, uses a gripper arm to remove a sensor unit from the loading bay and takes it quickly to the determined deposit location, where seismic measurements are then carried out. Everything takes place without human intervention, as the rover, lander and sensor unit complete their job autonomously and effectively. But behind this apparent ease are five years of hard work, during which the team from the Helmholtz Alliance ROBEX (Robotic Exploration under Extreme Conditions) laboured assiduously to make the vision of autonomous planetary exploration come true. And they succeeded on the Sicilian volcano of Mount Etna and its Moon-like lava landscape: "We managed to prove that this technology can also be used on future exploratory missions," says deputy spokesperson of the ROBEX Alliance, Armin Wedler, from the German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt; DLR).

In this case, the engineers and scientists used Mount Etna a Moon analogue: with its granular, crumbly surface, regular tremors at a depth of up to 600 kilometres and lava layers of varying thickness, the volcanic landscape is quite similar to that of Earth's lunar companion. The team from five DLR institutes spent four weeks in total on Mount Etna, transporting their experiments from the laboratory to the sometimes inordinately harsh reality with its gusty winds, rock falls and precipitous switches between Sun and fog. "We worked every day toward completing the full demonstration," says ROBEX scientific coordinator Martina Wilde from the Alfred Wegener Institute (AWI) describing the test campaign.

Creating autonomy on unfamiliar celestial bodies

The autonomous functions of the rover, lander and sensor units were key to the success of the mission. "If we want to conduct research at inaccessible locations with extreme environmental conditions, for instance on the Moon, it will not be possible to intervene in real time – be it in the control room or on site," explains Wedler from the DLR Robotics and Mechatronics Center. "So our goal was for the rover to use its camera eyes to scan the environment and to plan its route autonomously." In this scenario, the RODIN lander assumes the role of the stationary unit, responsible for power supply and data connectivity between the control room, the rover and the sensor units. The positioning of four sensor units equipped with internal seismometers on the Moon might in future enable the first identification of the satellite's interior structure and the composition of the upper regolith layers.

Several DLR institutes collaborated and contributed their expertise to the implementation of this ambitious mission: the DLR Robotics and Mechatronics Center was in charge of the rover, while the DLR Institute of Space Systems provided the lander and the sensor units, and the DLR Institute of Composite Structures and Adaptive Systems developed the structure of the sensor units. In addition, DLR Space Operations and Astronaut Training enabled the communication infrastructure on the ground, and the DLR Institute of Planetary Research conducted the seismic measurements.

Collaboration between deep sea and space research

ROBEX also entailed the first cooperation between scientists and engineers from deep sea and space disciplines. "Both groups encounter inaccessible regions subjected to extreme conditions in the course of their research," says Wilde. "In deep-sea environments, for instance, the aggravating factors are the darkness and the water itself, while space research faces microgravity and radiation." But a common feature of both regions is that navigation, power supply and data communication present major challenges. This is why the research included 16 institutions, and involved setting up a joint demo mission that confirmed successful deployment of the newly developed technologies for both areas in the respective settings. So in addition to the Etna campaign for the space researchers, their deep-sea colleagues will also initiate a mission on 22 August 2017 to test several robotic systems off Svalbard in the Arctic region.

Contact
  • Manuela Braun
    Com­mu­ni­ca­tion
    Ger­man Aerospace Cen­ter (DLR)
    Pro­gramme and Strat­e­gy, Space Re­search and Tech­nol­o­gy
    Telephone: +49 2203 601-3882
    Fax: +49 2203 601-3249
    Hansestraße 115
    51149 Cologne
    Contact
  • Armin Wedler

    DLR Robotics and Mecha­tron­ics Cen­ter
    Telephone: +49 8153 28-1849
    Contact
  • Martina Wilde
    Al­fred We­gen­er In­sti­tut (AWI)

    Al­fred-We­gen­er-In­sti­tute, Helmholtz-Cen­ter for Po­lar and Ma­rine Re­search
    Telephone: +49 471 4831-1087

    Contact

Main menu